DURASHINE™ Roof & Walls

DURASHINE™ Profile Benefits

Long Lasting: Zinc-Aluminium alloy coating provides excellent corrosion resistance compared to galvanized steel. Zinc-Aluminium alloy coating and superior paint system gives longer product life over pre-painted galvanized steel.i.e.2 to 4 times longer life than ordinary color coated sheets.

High Strength (550 MPa) : Longer span and wider spreads ensure freedom in design. Light weight makes it easy to handle and low-ers cost of supporting structure.

Better Thermal Efficiency: DURASHINE™ profiles have high heat reflectivity thereby making it an energy efficient solution. It maintains lower temperature inside as compared to galvanized sheets, asbestos sheets, concrete slab and clay tiles

AVAILABLE STANDARD COLOURS

APPLICATIONS

DURASHINE™ ROOF
Total Coated Thickness (mm) 0.45, 0.35, 0.32
Sheet Length* (mm) 2440 (8ft), 3050 (10ft), 3660 (12ft)
4270 (14ft), and 4880 (16ft)
Metallic Coating Zinc-Aluminium Alloy Coating
Effective Cover Width (mm) Nominal 1015
Overall Width (mm) Nominal 1072
Min Roof Slope (mm) 3
*Sheet length in feet is approximate value.
 
MAXIMUM SUPPORT SPACING (mm)*
Type of Span Roof Wall
Single Span 950 1700
End Span 1200 2450
Internal Span 1750 2850
Overall Width (mm) Nominal 1072 Roof

Anti - capillary Groove: Anti - capillary grooves ensure leak-proof performance

Wider Profile: Wider profile covers larger area and hence requires less number of sheets. It also results in saving of time.

Wider Valleys: Wider valleys ensure higher water discharge during heavy rains.

DURASHINE WALL

DURASHINE™ WALL
Total Coated Thickness (mm) 0.45, 0.35, 0.32
Sheet Length* (mm) 2440 (8ft), 3050 (10ft), 3660 (12ft)
4270 (14ft), and 4880 (16ft)
Metallic Coating Zinc-Aluminium Aloy Coating
Effective Cover Width (mm) Nominal 1110
Overall Width (mm) Nominal 1150
*Sheet length in feet is approximate value.
 
MAXIMUM SUPPORT SPACING (mm)*
Type of Span Wall
Single Span 1150
End Span 1500
Internal Span 1650
* Terms and conditions applicable

Widest Profile: DURASHINE ™ wall is one of the widest wall profile sheets available, which is also quick and easy to install

Disclaimer on Condensation:

Condensation is the natural formation of water droplets on the bottom side of any installed metal roofing sheet. It may occur when there is a difference in temperature between the air in the building and the sheet itself, causing the water vapour (moisture) in the air to condense on the inside of the sheet. It is a natural phenomenon and hence no claim will be entertained in this regard.

The risk of condensation may be minimised by providing proper ventilation arrangement in the roofs and by using suitable insulation.